Afridev and Malda pumps both started ”life” in Malawi in the early 80’s.

Focus on the development of Afridev shifted then to Kenya in 1983 ; and the Malda is the ”direct action” version of the Afridev pump developed in Malawi – MALawi Direct Action Pump :  in 1994, UNICEF placed an initial order of 100 MALDA produced locally and installed in the project areas of Inter Aide and Concern Universal.

Both of them are piston pumps.

” The piston is fitted with a non-return valve (the piston valve) and slides vertically up and down within a cylinder that is also fitted with a non-return valve (the foot valve). Raising and lowering the handle of the pump causes vertical movement of pump rods that are connected to the piston. When the piston moves upwards, the piston valve closes and a vacuum is created below it, causing water to be drawn into the cylinder through the foot valve, which opens. Simultaneously, water above the piston, held up by the closed piston valve, is displaced upwards. In a simple suction pump it emerges through the delivery outlet. When the piston moves downwards, the foot valve closes, preventing backflow, and the piston valve opens, allowing the piston to move down through the water in the cylinder. ”

source Water Aid : http://www.wateraid.org/~/media/Publications/Handpumps.pdf

These pumps have been designed so that it could be maintained by users (VLOM pumps -Village Level Operation and Maintenance) and could be manufactured locally.

The Afridev, in comparison to another popular hand pump – the India Mark II* -, can be considered as less robust, as wearing parts need to be change regularly (yearly), but the repair can be done more easily:
*India Mark II are not VLOM

• need few tools
• the piston can be removed from the cylinder without dismantling the rising main. The foot valve is retractable with a fishing tool, meaning less risks of rods falling down and losing the borehole.

It is designed to lift water from a depth no greater than 45 metres.

More information here:
www.rural-water-supply.net/en/implementation/public-domain-handpumps/afridev
rural-water-supply.net/_ressources/documents/default/286.pdf
or here
akvopedia.org/wiki/Afridev_pump

The MALDA pump is a direct action pump, i.e. operating without the help of leverage, linkages and bearings, and depend on the strength of the operator pumping to lift the column of water.
The maximum recommended lift is 15 m.

More information here:
www.rural-water-supply.net/en/implementation/public-domain-handpumps/malda-pump
www.rural-water-supply.net/_ressources/documents/default/MALDA_Installation-Manual_Ed-2003.pdf
or here
akvopedia.org/wiki/Malda_pump

To go further: www.rural-water-supply.net/en/resources/details/475

In December 2012 an internal workshop and exchange was held by Inter Aide between Program managers from Ethiopia, Sierra Leone and Malawi. It was the opportunity to learn and exchange from each other on methods and tools related to ”maintenance programs” and especially on the maintenance of hand pumps.

The 1st week was spent in Ethiopia with Yembeh, who came from Sierra Leone to explain to his Ethiopian colleagues the working principles of India Mark pumps. Indeed, the context where Inter Aide is working in Ethiopia allows the construction of gravity fed networks, whereas in Sierra Leone, the team is constructing and equipping hand dug wells. However, in the lowlands of Ethiopia, hand pumps are more common and the team wanted to get more experience on it in order to integrate such systems into a maintenance approach.

Yembeh (right) explaining India Mark pumps to his colleagues from Ethiopia